Clean and Dirty Water Installation
Clean and dirty water installations are examined under two separate headings.
- Clean Water Installation: It is the process of gradually drawing hot and cold water pipes separately to the intermediate taps, bathroom mixers, sink mixers, kitchen mixers and laundry faucet to be used by using PE-Xb and PE-Xc pipes and passing them through the spiral sheath. Pipes laid in each cold or hot pipeline are screed and then connected to collectors with valves at a suitable point. Thus, it is offered for use in a healthy and efficient way for many years.
- Waste Water Installation: The water usage areas in the buildings are now called the city sewer, the dirty and sewage water, and the pipe system conveyed by the decay pits and filtration in the places not found in the buildings. The removal of dirty and dirty water from the building in the fastest way and before it reaches the quota of threatening health is done by means of the sewage system. It also prevents odor, insects and gas from passing through the pipes into the building. Air, water and gas leaks are definitely eliminated.
What Should Be Considered While Laying Plumbing Pipes?
Accessibility is taken into consideration while laying the Clean and Waste Water System. Because it is important in terms of easy repair of malfunctions that may occur. The pipes are insulated to prevent the pipes used from freezing during the winter months.
In case the water speed is higher than it is or if it is opened and closed suddenly, a pressure imbalance occurs. This also damages the plumbing elements. The slope is adjusted so that the air in the water can be easily discharged from the counter.
